Volkswagen Parts Catalog
SPRING
KITS by 
This spring kit allows the option to customize the ride height of your Volkswagen. Used
for years on race cars to balance weight distribution, Ground Control
spring kits have been adapted for street use. Most other spring kits offer only one set
ride height when installed. Our unique design allows for easy adjustment. Simply lift the
corner(s) that you wish to adjust and spin the adjustable spring seat up or down to raise
or lower the vehicle. Ground Control spring kits are also
designed to be used with either stock or aftermarket shocks.
HARDWARE
Ground Control suspension kits offer the highest quality
components available.
Springs: We are pleased to announce that Eibach Springs
has chosen Ground Control Systems as the west coast distributor
for their ERS (Eibach Race Spring) line of springs. All of our
ride height adjustable kits now exclusively feature Eibach Springs
. All racing spring rates are available as well as a new custom made street spring. This
street spring is barrel-shaped to allow for a more suitable street spring rate while
retaining sufficient spring travel. All Eibach Springs offer a
lifetime warranty against spring rate change and sagging.
Adjusters: All adjusters consist of a threaded sleeve and adjustable
spring seat and are made using 6061-T6 billet aluminum; anodized for greater durability
and appearance. The threads on the adjusters are square cut which locks the adjustable
spring seat in place under load. For further precaution, a set screw in the adjustable
spring seat can be used to secure adjuster. The aluminum top hats have been custom made to
adapt the small diameter springs to Volkswagen stock upper mounts. Top hats are also made
of high strength 6061-T6 billet aluminum.
|
|
KIT PRICE: $ 399
Spring kits include:
(4) Springs
(4) Adjusters
(4) Top Hats |
SHOCK ABSORBERS
Tokico Gas Shocks: These shocks are excellent as a performance upgrade
for your Volkswagen. Available in adjustable (Illumina) and non-adjustable (Premium
Performance) configuration, Tokico offers shocks suitable for street performance or all-
out racing. Tokico shocks also carry a lifetime warranty against defects.
|
|
FRONT |
|
REAR |
| Premium Performance |
|
$ 62 ea. |
|
$ 64 ea. |
| Illumina 5-way adjustable |
|
$ 124 ea. |
|
$ 112 ea. |
| Special Racing shock |
| (requires shortening of strut housing) |
|
$ 95 ea. |
Koni Sport Shocks: These shocks are designed with the aggressive driver
in mind. Koni Sports are a twin-tube, low pressure gas shock suitable for street or race
applications and are adjustable for rebound only.
|
|
FRONT |
|
REAR (all) |
| A1 Chassis Rabbit, Scirocco, Jetta, Cab. |
|
$ 156 ea. |
|
$ 135 ea. |
| 88-92 Corrado (ex. VR6) |
|
$ 156 ea. |
|
$ 135 ea. |
| A2 Chassis (w/ non-sealed strut) |
|
$ 156 ea. |
|
$ 135 ea. |
| A2 Chassis (w/ sealed strut) |
|
$ 168 ea. |
|
$ 135 ea. |
| A3 Chassis |
|
$ 163 ea. |
|
$ 135 ea. |
Bilstein Sport Shocks: These shocks are for the performance minded
driver. These shocks are also suitable for street or race and have a unique self adjusting
system.
|
|
FRONT |
|
REAR (all) |
| A1 Chassis Rabbit, Scirocco, Jetta, Cab. |
|
$ 111 ea. |
|
$ 111 ea. |
| 90-91 Corrado (HD shock only) |
|
$ 209 ea. |
|
$ 119 ea. |
| A2 Chassis |
|
$ 171 ea. |
|
$ 96 ea. |
| A3 Chassis (ex. VR6) |
|
$ 134 ea. |
|
$ 96 ea. |
| A3 Chassis w/ VR6 |
|
$ 149 ea. |
|
$ 96 ea. |
GAB Shocks: These shocks are the top of the line and valved for racing
applications. They are adjustable and available for vehicles with A2 chassis using a
non-sealed front strut.
|
|
FRONT |
|
REAR (all) |
| 90-92 Corrado |
|
| 85-92 Golf, Jetta |
|
$ 208 ea. |
|
$ 191 ea. |
URETHANE SUSPENSION BUSHINGS
Replacing stock suspension bushings with urethane reduces unwanted suspension movement and
allows suspension components such as sway bars and springs to work more effectively.
| Control arm bushings |
|
FRONT |
|
REAR |
| A1 Chassis |
|
$ 49 |
|
$ 29 |
| A2 Chassis |
|
$ 29 |
| A3 Chassis |
|
$ 29 |
| |
| Replacement sway bar bushings |
|
$ 19 |
|
$ 19 |
SWAY BARS
Sway bars are an excellent way to upgrade your Volkswagen suspension. Sway bars reduce
body roll and increase stability when cornering. Also, they do not affect ride quality
under normal driving conditions. All sway bars come with urethane bushings. Lightweight
hollow sway bars are now available in a 25 mm front and 28 mm rear size.
| A1 Chassis |
| (Vehicles not equipped with OE sway bars add $ 40 [front] and $ 10
[rear]) |
| 19 mm front bar |
$ 120 |
|
|
| 22 mm front bar |
$ 140 |
| 25 mm lightweight front bar |
$ 150 |
| |
| 25 mm rear bar |
$ 125 |
| 28 mm rear bar |
$ 150 |
| 28 mm lightweight rearbar |
$ 170 |
| |
| A2 Chassis |
| (Vehicles not equipped with OE front sway bar add $ 30) |
|
| 22 mm front bar |
$ 120 |
| 25 mm lightweight front bar |
$ 150 |
| |
| 25 mm rear bar |
$ 180 |
| 28 mm rear bar |
$ 190 |
| 28 mm lightweight rearbar |
$ 200 |
| |
| A3 Chassis |
| 22 mm front bar |
$ 120 |
| 25 mm lightweight front bar |
$ 150 |
| |
| 25 mm rear bar |
$ 180 |
| 28 mm lightweight rearbar |
$ 200 |
Eibach PRO-KIT AND SPORTLINE SPRINGS
Eibach offers two different spring kits for most Volkswagens. The Pro-Kit offers a
progressive rate spring that lowers your Volkswagen one inch. These springs are slightly
stiffer that stock for increased performance while retaining excellent ride quality.
Sportline springs go one step further. They are slightly stiffer than the Pro-Kit springs
and lower your vehicle between 1.5 (Jetta, A2 Golf) and 1.8 (Cabriolet, A3 Golf) inches.
| PRO-KIT |
|
PRICE |
| A1, A2 Chassis |
|
$ 199 set |
| A3 Chassis |
|
$ 216 set |
| A2 Chassis |
|
$ 171 ea. |
|
$ 96 ea. |
| Passat |
|
$ 245 set |
| |
| SPORTLINE |
|
PRICE |
| Cabriolet, A2/A3 Golf-Jetta |
|
$ 187 set |
ADJUSTABLE CAMBER/CASTER PLATES
Designed by Ground Control Systems, our camber/caster plates are
constructed of 7075-T6 billet aluminum and allow for multi-axis adjustment. Primarily for
racing applications, the camber/caster plates give maximum negative camber as well as
increased travel and rigidity. Camber/caster plates must be used with a 2 ½ inch ID
spring and cutting of the strut tower is necessary.
| |
Camber/Caster Plate Kit Price |
|
|
$ 265 pair (front only) |
* Race Package Price: With the purchase of any (4) shocks, sway bars,
control arm bushings, a Ground Control spring kit, and
camber/caster plates, well take 10% off the total price (no exclusions).
|